Panasonic KX-TEB308 Universal Remote User Manual


 
Getting Started 23
Entering System Programming Mode
To enter system programming mode, the system password is required.
Note
means default value throughout these programming instructions.
5.2 Programming Procedures
Notes
means default value throughout these programming instructions.
means to select "All" throughout these programming instructions.
The following are displayed when you store a number, such as a telephone number, or
feature number:
P: PAUSE; -: CONF; F: FLASH/RECALL; [ ]: INTERCOM
x: PAUSE (substitutes for any number [i.e., wild card])
To return to the previous programming item, press .
To correct a wrong entry, press CLEAR and then enter the new input.
To delete a stored parameter, press CLEAR, enter the new input, and then press STORE.
•Press or to scroll the display.
Some programmes cannot have a value left empty.
SELECT
FLASH
CLEAR
Fixed Button (KX-T7730/KX-T7735) Function
#
System Password for
Administrator—for PT Programming
Programming No.
3 digits
1234