Filter
Top Products
27
Various Settings
To Set the Type of External Source
Equipment that Is Connected to the AV2
21-pin Scart Socket
1 Press the MENU button S to display the Main menu
on the TV screen.
2 Press the Cursor buttons (34)
P to select “Functions” then
press the OK button R.
3 Press the Cursor buttons (3421) P to select “AV2”
and “DECODER”, “TIMER” or “EXT” in this order.
4 Press the Cursor buttons (34) P to select the type of
external source equipment which is connected to
the VCR’s AV2 21-pin socket.
≥ Set the external source equipment as follows:
DECODER: When a decoder is connected.
TIMER: When a digital receiver is connected.
≥ When this is set, it is possible to have
timer recordings for a Digital Receiver
execute automatically simply by
switching the Digital Receiver into
timer standby mode and then
switching this VCR into timer
recording standby mode.
(See page 12.)
EXT: When another VCR or a satellite
receiver is connected.
5 Press the OK button R to conclude the setting.
6 Press the EXIT button Q to exit the On Screen Display.
OSD
Power save
VCR display
AV2
TV system
Language
Country
: ON
: OFF
: DIMMED
: DECODER
: PAL
: English
: others
Functions
VCR
For Reduced the VCR’s Power
Consumption When the VCR Is Switched
Off
1 Press the MENU button S to display the Main menu on
the TV screen.
2 Press the Cursor buttons
(34) P to select “Functions”
then press the OK button R.
3 Press the Cursor buttons (3421) P to select “Power
save” and the entry field for “Power save” in this order.
4 Press the Cursor buttons (34) P to select “ON” or
“OFF”.
ON: In this setting, the power consumption is greatly
minimised when the VCR is turned off (Standby
mode). In this case, the following happens:
≥ The item “VCR display” is automatically set to
“OFF”.
≥ To turn the VCR on, keep the VCR-ON/OFF
button 1 pressed on the VCR main unit. It is not
possible to turn it on with the remote control.
≥ The Power save function works only when the
VCR is turned off (Standby mode). It does not
operate in the timer recording standby mode.
After all programmed timer recordings have
been made, and after all programmed data have
been erased, the VCR switches over to the
Power save mode.
≥ When the VCR is off, Pay TV programmes
cannot be watched on the TV because the
signal from the connected decoder is not looped
through. To watch them, turn on the VCR.
OFF: In this setting, the power consumption is not
reduced when the VCR is turned off (Standby
mode).
5 Press the OK button R to conclude the setting.
6 Press the EXIT button Q to exit the On Screen Display.
OSD
Power save
VCR display
AV2
TV system
Language
Country
: ON
: OFF
: DIMMED
: DECODER
: PAL
: English
: others
Functions
VCR
For Automatic Change of the Brightness
of the VCR Display When the VCR Is
Switched Off
1 Press the MENU button S to display the Main menu
on the TV screen.
2 Press the Cursor buttons (34)
P to select “Functions” then
press the OK button R.
3 Press the Cursor buttons (3421) P to select “VCR
display” and the entry field for “VCR display” in this
order.
4 Press the Cursor buttons (34) P to select the desired
condition.
≥ When the VCR is switched off, the brightness of the
VCR display is as follows:
ON: Indications are brightly lit.
OFF: Indications are not lit.
DIMMED: Indications are dimly lit.
5 Press the OK button R to conclude the setting.
6 Press the EXIT button Q to exit the On Screen Display.
OSD
Power save
VCR display
AV2
TV system
Language
Country
: ON
: OFF
: DIMMED
: DECODER
: PAL
: English
: others
Functions
VCR