Filter
Top Products
Recording
REC
OSD/DISPLAY
SP/LP/EP
Set the TV set to the video channel and insert a cassette into the video recorder;
make sure that the cassette's protection tab is still in.
Select a channel to record from.
Select the AV channel if you are recording via the 21-pin scart cable.
Press to start recording.
To pause recording:
The function will switch itself off after approx. 5 minutes to protect the video heads.
To resume recording:
!
!
!
!
!
Press the Stop button to stop recording.
REC
SP :
LP :
EP :
normal recording time - optimal picture quality
double recording time - simple picture quality
triple recording time - reduced picture quality
The display of the video recorder shows: time - counter - tape remain
The start of a cassette is indicated as .
Press until ' is displayed.
-----
!
OSD/DISPLAY RE'
D
When you play back LP or EP recordings, some cassettes (e.g. type)
may produce interference. This is not indicative of a malfunction.
E-300
Tape remain counter
!
Prior to starting the recording session, press to set the tape speed.SP/LP/EP
VCR
SP
VCR
SP
SV120 HV60 HV50 MV15
SV120 HV60 HV50 MV15
SV120 HV60 HV50 MV15
D
Recordings in the S-VHS or S-VHS ET REC mode are supported by the PAL
TV system only. (Only SV120, page 23)
10