Panasonic CT 20SX10 CRT Television User Manual


 
6
O
PTIONAL
E
QUIPMENT
C
ONNECTIONS
Optional Equipment Connections
VCR Connection
VCRs, video disc players, video game equipment, and DSS equipment can also be
connected to the video inputs. See the optional equipment manual for more
information.
Procedure
1. Connect equipment as shown to front or rear Audio/Video input jacks.
2. Select the Video mode by pressing TV/VIDEO button.
3. Operate optional equipment as instructed in equipment manual.
Push to open the front panel of the television to use the Audio/Video input jacks for
optional equipment. Press the TV/VIDEO button to select VIDEO 3 input mode.
Note: The S-VIDEO connection provides higher quality picture. It overrides other
VIDEO connections. Use INPUT 3, AUDIO L and R with S-VIDEO
connection.
IMPORTANT INFORMATION REGARDING USE OF VIDEO GAMES,
COMPUTERS, DSS OR OTHER FIXED IMAGE DISPLAYS.
The extended use of fixed image program material can cause a permanent “shadow
image” on the picture tube. This background image is viewable on normal programs in
the form of a stationary fixed image. This type of irreversible picture tube deterioration
can be limited by observing the following steps:
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. Do not display the fixed image for extended periods of time.
C. Turn the power off when not in actual use.
Note: The marking or retained image on the picture tube resulting from fixed image use is not
an operating defect and as such is not covered by Warranty. This product is not
designed to display fixed image patterns for extended periods of time.
VIDEO AUDIO
L
R
Y
P
B
P
R
L
R
TO AUDIO
AMP
VIDEO
INPUT
1
INPUT
2
COMPONENT
VIDEO INPUT
L
R
AUDIO
S-VIDEO
R
ANT
ANT IN ANT OUT
VIDEO OUT
S-VIDEO
VIDEO
AUDIO OUT
L
R
Use either the
S-Video or Video
connection.
TERMINALS ON BACK OF TV
CABLES NOT SUPPLIED
VCR
INPUT 3
HPJ
S-VI DEO
VIDEO L-AUDI O-R
Incoming Cable
TERMINALS ON FRONT OF TV
0363 E Prod .fm Page 6 Wednesday, February 7, 2001 10:17 AM