Filter
Top Products
12
2 T
UNER
PIP O
PERATION
WITH
A
VCR - N
O
C
ABLE
B
OX
2 Tuner PIP Operation with a VCR - No Cable Box
Note: Refer to the FEATURE COMPARISON CHART on page 3 for your television PIP capability.
This television includes a two tuner Picture In Picture (PIP) feature. This allows
watching two (2) live broadcasts at the same time without or with an external video
source (VCR).
Connect your television to a VCR, as shown.
Note: The Remote Control must be programmed with the supplied codes to operate the VCR. See
Programming the Remote Control in the Remote Control Quick Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame on screen.
Note: The audio is from the Main Picture only.
To view an external video source in the PIP frame:
1. Press the TV/VIDEO button on the Remote Control to select the same video input to
which your VCR is connected.
2. Verify the VCR is on.
3. Choose channels for the
Main Picture
by pressing the TV button on the Remote
Control and using the numeric keypad or CH up/down button.
4. Choose channels for the
PIP frame
by pressing the TV button on the Remote Control
and using the PIP Channel up/down buttons.
CABLES NOT SUPPLIED
CONNECTIONS ON BACK OF TV
COMPONENT
VIDEO INPUT
INPUT 1
R AUDI O
L
P
B
P
R
Y/VIDEO
TO AUDIO
AMP
L
R
R AUDI O
LINPUT 2
VIDEO
S-VIDEO
VCR
L
R
VIDEO OUT
AUDIO OUT
ANT IN
Incoming
Cable
ANT IN
ANT OUT
SWAP and RECALL Buttons
The SWAP button switches the PIP and
Main Picture source. Press the RECALL
button for on screen PIP and Main Picture
source status.
0373 -1E.fm Page 12 Monday, February 26, 2001 3:47 PM