Filter
Top Products
8
Cable Connection
Connecting the Aerial cable to the RF In Terminal
S-VIDEO
AUDIO
COMPONENT VIDEO INPUT INPUT
P
B
P
R
Y
VIDEO
R
L
TO AUDIO
AMP
R
L
12
123
VIDEO
PROG
OUT
ANT1
ANT2
SPLIT
OUT
Notes:
(1) To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ohm coaxial) and the correct terminating
plug are required.
(2) If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerial
socket and your television receiver.
(3) Your local Television Service Centre or Dealer may be able to assist you in obtaining the correct Aerial system for your
particular area and the accessories required.
(4) Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs incurred,
are the responsibility of you, the Customer.
Note: Certain cable systems offset some channels to reduce interference or have
Premium (scrambled) channels. A cable converter box is required for proper
reception. Check with your local Cable company for its compatibility
requirements.
Incoming Cable from
Home Antenna
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of TV
• For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor antenna is
recommended. Antenna Mode must be set to TV.
• Incoming Cable from Home Antenna
Connect home antenna to ANT1 connection on back of television. Select TV mode and ANT1 in the SET UP menu.
( Cable Mode is preset at the factory. Antenna users must change to TV mode and select ANT1 in the Set Up Menu
under Prog chan.)
Antenna Connection
VHF Aerial
UHF Aerial
Mixer
75 Ohm
Coaxial Cable