Filter
Top Products
6 z
OPTIONAL EQUIPMENT CONNECTIONS
ENGLISH
Optional Equipment Connections
Note: The remote control must be programmed with supplied
codes to operate the optional equipment.
VCR Connection
VCRs, video disc players, video game equipment, and
DSS equipment can also be connected to the video inputs.
See the optional equipment manual for more information.
Note: VIDEO 1 input is a dual-purpose input. It is primarily
intended for connection with 480i devices such as a DVD
player using the Y P
B
P
R
component video jacks and
Audio L & R jacks. However, it can also be connected to
conventional composite video sources such as a VCR,
using only the Y/Video jack and Audio L & R jacks. The
on-screen label will display Component or Video 1
depending on which source is connected.
Note: Rear A/V jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 3 for your
model’s capabilities.
Procedure
• Connect equipment as shown to front or rear Audio/
Video input jacks.
• Select the Video mode by pressing TV/VIDEO button.
• Operate optional equipment as instructed in equipment
manual.
Note: Do not connect S-VIDEO and VIDEO signal to INPUT 2 at the
same time. If both are connected, signal interference will result.
Use either the S-VIDEO or the Video signal only.
Front Control Panel
The front control panel can be used to operate the television
when the remote control is not available
.
A second VCR, Camcorder, DVD player, a video disc player,
video game equipment or DSS equipment can also be
connected to the video inputs. See the optional equipment
manual for details
Procedure
• Connect equipment to front Audio/Video input jacks.
• Press TV/VIDEO button to select the desired input.
• Operate optional equipment as instructed in equipment
manual.
Cable Box Connection
Follow this diagram when connecting your television to a
Cable Box.
Procedure
• Tune the television to channel 3 or 4 depending on the
RF out setting of the cable box.
• Using the cable box, tune to the premium cable channel
you want to view.
Digital TV - Set-Top Box (DTV-STB) or DVD
Player Connection
Use this diagram to connect the Panasonic DTV-STB
(Digital TV-Set-Top Box) to the back of your TV.
Note: Rear A/V jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 3 for your
model’s capabilities.
Notes:
• There are three video jacks, Y, P
B
, and P
R
.
Separate component color inputs provide
luminance and color separation. Use the L (left)
and R (right) audio inputs.
• Select DTV-STB to 480i output mode. TV set can
receive 480i signal only. Picture distortion will result
if any other type of format is selected (i.e. 480p,
720p or 1080i).
TERMINALS ON BACK OF TELEVISION
VCR
PLAY
STOP
R
E
W
FF
ANT IN
ANT OUT
VIDEO OUT
AUDIO OUT
L
R
Incoming
Cable
P
R
P
B
Y/VIDEO
R-AUDIO-L
R-AUDIO-L VIDEO
COMPONENT
VIDEO INPUT
INPUT 1
S-VIDEO
INPUT 2
L
R
TO AUDIO
AMP
ANT
CABLES NOT INCLUDED
Use either the S-Video or
Video Connection
L - AUDIO - RVIDEO
INPUT 3
TV / VIDEO
POWER
A
C
T
I
O
N
CH
CH
VOL
VOL
VIDEO 3 L - AUDIO - R
A
C
T
I
O
N
CH
CH
VOL
VOL
TV/VIDEOPOWER
FRONT AV PANEL FOR CT-32SL15
FRONT AV PANEL FOR CT-32SC15
POWER ON/OFF
ON/OFF INDICATOR
INFRARED SENSOR
EXIT
Note: The ON/OFF indicator LED (red) will light up (red) when
the set is on.
P
R
P
B
Y/VIDEO
R-AUDIO-L
R-AUDIO-L VIDEO
COMPONENT
VIDEO INPUT
INPUT 1
S-VIDEO
INPUT 2
L
R
TO AUDIO
AMP
ANT
Incoming
Cable
ANT IN ANT OUT
15
CABLE BOX
TERMINALS ON BACK OF TELEVISION
CABLES NOT INCLUDED
P
R
P
B
Y/VIDEO
R-AUDIO-L
R-AUDIO-L VIDEO
COMPONENT
VIDEO INPUT
INPUT 1
S-VIDEO
INPUT 2
L
R
TO AUDIO
AMP
DIGITAL TV OUTPUT
Y
P
B
P
R
S-VIDEOVIDEOR-AUDIO-L
NTSC OUTPUT
R-AUDIO-L
CABLES NOT SUPPLIED
TERMINALS ON BACK OF
DTV-STB OR DVD PLAYER
COMPONENT VIDEO INPUT
TERMINALS ON BACK OF TV