Panasonic CT 36SX31 CRT Television User Manual


 
13
I
NSTALLATION
Program Out Connection (PROG. OUT)
(For models CT-27SX31/U, CT-32SX31/U, and CT-36SX31/U)
To use the TV audio and video with optional video equipment, use PROG. OUT and TO AUDIO
AMP terminals on the back of the TV.
Note: When a component input video signal is connected to Video 1 (Y, P
B,
P
R
) terminals, and the TV
main picture is Component, the Program output video will be luminance signal (no color).
Procedure
1. Connect optional video equipment to PROG. OUT video and TO AUDIO AMP R/L
Audio terminals.
2. PROG OUT terminal display is the same as the on screen display.
See optional equipment manual for further instructions for recording or monitoring.
Amplifier Connection (To Audio Amp)
Connect to an external audio amplifier input for listening to a stereo system.
Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.
Audio Adjustments
1. Select TV SPEAKERS ON from AUDIO menu.
2. Set amplifier volume to minimum.
3. Adjust TV volume to desired level.
4. Adjust amplifier volume to match the TV.
5. Select TV SPEAKERS OFF&VAO from AUDIO menu.
6. Volume, mute, bass, treble and balance are now controlled from the TV.
Note: In OFF&FAO the volume is controlled by the external amplifier.
COMPONENT
VIDEO INPUT
INPUT 1
AUDIO
L
P
B
P
R
Y/VIDEO
RL
VIDEO
INPUT 2
S-VIDEO
R
PROG.
OUT
R
L
TO AUDIO
AMP
CONNECTIONS ON BACK OF TV (may vary)
CABLES NOT SUPPLIED
MONITOR VCR
OR
ANT 1
ANT 2
SPLIT
OUT
CABLES NOT SUPPLIED
CONNECTIONS ON BACK OF TV (may vary)
COMPONENT
VIDEO INPUT
INPUT 1
AUDIO
L
P
B
P
R
Y/VIDEO
RL
VIDEO
INPUT 2
S-VIDEO
R
PROG.
OUT
R
L
TO AUDIO
AMP
ANT 1
ANT 2
SPLIT
OUT
External Amplifier
0372 E.Prod.fm Page 13 Thursday, June 14, 2001 10:36 AM