Filter
Top Products
RQTC0074
7
COAXIAL IN
STEP 1 Connection to a television
STEP 2 The remote control
Amplier with a built-in
decoder or a decoder-amplier
combination
Coaxial cable
Enjoying multi-channel surround soundn
Change “DOWN SAMPLING”, “DOLBY DIGITAL” and “DTS”
(è page 14, “AUDIO” tab).
Connect the AC power supply cord lastn
Conserving power
This unit consumes a small amount of power, even when it is turned off (1 W). To save
power when the unit is not to be used for a long time, unplug it from the household AC
outlet.
Batteriesn
Insert so the poles (4 and 3) match those in the remote control.
Do not use rechargeable type batteries.
Do not:
mix old and new batteries.
use different types at the same time.
heat or expose to ame.
take apart or short circuit.
attempt to recharge alkaline or manganese batteries.
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage items the
uid contacts and may cause a re.
Remove if the remote control is not going to be used for a long period of time. Store in
a cool, dark place.
Use
Aim at the remote control sensor (è page 8), avoiding obstacles, at a maximum range
of 7 m (23 feet) directly in front of the unit.
•
•
•
•
•
•
•
•
n
AC power supply cord (included)
To household AC outlet
Connection to a television/The remote control
AC IN
R6/LR6, AA