Panasonic PT 52LCX65 Projection Television User Manual


 
21
Getting Start ed
RGB signals that can be input
The table below lists the different types of RGB signals that can be input.
If a signal which differs greatly from the types listed below is input, the picture may not be displayed
correctly, or a black background may be displayed. In this case, “signal” will flash on-screen for about 5
seconds.
Notes:
• Input signals, other than those listed with a * mark, will give you a beautiful, stable picture.
• The D-SUB15P connector can accept RGB (H-V sync separate).
• When an external video processor/scaler is used, it must have RGB (H-V sync separate) output.
Mode type
Signal data
Information menu
display
No. of dots
(H × V)
Horizontal frequency
(kHz)
Vertical frequency
(Hz)
Personal Computer
Signals
VGA400 (70 Hz) 640 × 400 31.47 70.08 VGA400
VGA480 (60 Hz) 640 × 480 31.47 59.94 VGA480
SVGA (60 Hz) 800 × 600 37.88 60.32 SVGA
* XGA (60 Hz) 1 024 × 768 48.36 60.00 XGA