Filter
Top Products
51
For Your Information
DVD/Video CD/CD
Play fails to start even when
PLAY is pressed...
Play starts but then stops
immediately...
Picture is distorted during rapid
advance or rapid reverse...
No Forward/Reverse search
play...
Play does not start even when
title is selected...
Audio soundtrack and/or
subtitle language is not the one
selected at the initial settings...
No subtitles...
Alternative audio soundtrack
(or subtitle) language cannot
be selected...
Angle cannot be changed...
Correction
• This unit cannot play discs other than DVDs, Video CDs and CDs.
• The disc may be dirty and require cleaning.
• Be sure disc is installed with label side up.
• The picture will be somewhat distorted at times: this is normal.
• Some discs may have sections which prohibit Forward/Reverse
search. (P. 17)
• Confirm the “DVD LOCK” setting. (P. 45)
• If the audio soundtrack and/or subtitle language selected at DVD
initial settings does not exist on the disc, it will not be accessible.
• Subtitles appear only when available on disc.
• Select “ON” at the “Changing subtitle language” section (P. 36) to
display subtitles.
• Alternative language cannot be selected with discs which do not
contain more than one language.
• For some discs, alternative language cannot be selected with the
AUDIO or SUB TITLE button. Try selecting it from the DVD menu
if available.
• This function is dependent on software availability. Even if disc
has multiple angles, they may be recorded for specific scenes
only (ANGLE Indicator on unit lights up). (P. 37)
Correction
• First, unplug unit. Then, prepare a rigid wire (e.g. an extended
paper clip, etc.) and, applying moderate force, insert it straight
into the hole at the base of the tray. The tray will eject a little.
Now, pull the tray all the way out and remove the disc. (P. 6)
Miscellaneous
The disc cannot be removed...
Warning and Instruction Displays
These displays will alert you of a missed operation or provide further instructions.
OSD
PLEASE SET CLOCK
BEFORE TIMER SETTING
PLEASE CHECK THE DISC, AND FOR
STAINS OR SCRATCHES ON DISC
Caution
• If you attempt to set the On-Timer and
the Clock is not set...
• If you press PLAY, or the unit reads
data from a stained or scratched disc
in DVD mode. Also, if the type of disc is
other than DVD, Video CD or CD...
Page
12
7
20_25_27D52 (P50-51 Before Req.).p65 2002/04/16, 13:3051