Panasonic PV DF2702 DVD VCR Combo User Manual


 
19
Basic Operation
Copy Your Tapes (Dubbing)
Unauthorized exchanging and/or
copying of copyrighted recordings
may be copyright infringement.
• Please note that some tapes
cannot be dubbed on this unit.
Also, it is not possible to dub
DVD/Video CD/CD to VHS tape
using this unit.
Playback (Source)
1
Recording (Editing) unit
Insert pre-
recorded tape.
Insert blank tape
with record tab.
Dubbing tapes protected
with Copy Guard will have
poor quality results.
2
3
4
5
Press PLAY then
PAUSE at starting
point t
o put in
Standby mode.
Press PLAY
to start dubbing.
Press STOP
to stop dubbing.
Select “LINE” mode.
See “Selecting Input Mode” below.
Press REC, then
Press STILL/PAUSE
immediately
to put in
Standby mode.
Press STILL/PAUSE
to start dubbing.
Press STOP
to stop dubbing.
Selecting Input Mode
Method 1:
Press CH . The display will change as follows.
Method 2:
a Press ACTION for MAIN MENU.
b Press
to select “TV”, then press SET
for SET UP TV screen.
c Press
d Press ACTION twice to exit this mode.
1
2
3
125
(CABLE)
69
(TV)
or
Caution
STOP
Connections you’ll need to make
L-AUDIO IN-RVIDEO IN
Recording (Editing) unit
OUT
IN
IN FROM
ANT.
OUT TO
TV
VIDEO
R-AUDIO-L
Playing (Source) VCR
MONO
(Perform operation of steps 4 and 5 on both units at same time.)
*
Important:
If a remote control button does not work
when pressed, press the button on
the remote and try the button again.
to select “INPUT SELECT,” and
LINE 1
LINE 2
then press SET to select “TUNER,” “LINE 1” or
“LINE 2.”