Panasonic PV DM2092 DVD VCR Combo User Manual


 
13
Initial Setup
Unit
Optical digital audio
cable (optional)
Dolby Digital Decorder/
dts processing (optional)
Amplifier
Center speaker
Front
Speaker
Front
Speaker
Subwoofer
Surround
speaker
Surround
speaker
Unit
Dolby Digital Decoder
Amplifier
Speaker
or
Unit
dts (digital theater systems) Decoder
Amplifier
Speaker
When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts
bitstream is output from the unit Optical digital audio output connector. When the unit is
connected to a Dolby Digital decoder or dts decoder, you can enjoy theater-quality audio
in your home. [An optical digital audio cable (optional) is required when an optional Dolby
Digital decoder or dts decoder is used.]
Notes on connecting an Optical
digital audio cable (optional)
Firmly connect the cable to the
connector.
IMPORTANT NOTE:
Caution for optical digital audio
output connector:
When connecting an amplifier (with
an Optical digital input connector)
which does not contain the Dolby
Digital or dts decoder, be sure to
select OFF at Dolby Digital and
OFF at dts of the Settings for
DVD Operation AUDIO OUTPUT
(see page 59). Otherwise, any
attempt to play DVDs may cause
such a high level of noise that it
may be harmful to your ears and
damage your speakers.
When a dts decoder is connected,
please select Bitstream at dts of
the Settings for DVD Operation
AUDIO OUTPUT. If OFF is
selected, there will be no sound.
(See page 59).
Video CDs and CDs can be played
as normal.
Note:
Some dts decoders which do not
support DVD-dts Interface may not
work properly with the unit.
DM2092 (P12-13) connect.p65 2002/06/19, 14:5213