Filter
Top Products
10
SYSTEM INFORMATION
Please note that the following functions were added to
improve the operation of the combination cameras.
■ Additions
● Selection of Pan/Tilt Speed
The Pan/Tilt speed can be changed by selecting a mode in
the menu (A1) displayed on the LCD display of the con-
troller.
1. Select the desired monitor and camera.
2. Select a mode by pressing the [F3] or [F4] button.
“❑” indicates the currently selected mode.
SLW: Moves the Pan/Tilt Head at lower speed.
FST: Moves the Pan/Tilt Head at higher speed.
3. Move the Joystick to move the Pan/Tilt Head in the
desired direction.
Note: Changing the Pan/Tilt speed by pressing the
[STOP/SLOW] button is enabled only when FST
mode is selected.
The above function is available in a system that includes
the following equipment:
WV-CU550 Series System Controller Ver. 6.00 or later
WJ-SX550 Series Matrix Switcher
CPU Ver. 6.00 or later
Control Ver. 6.00 or later
WV-PB5548 Data Board Ver. 6.00 or later
■ Version Information
● WJ-SX550 Series Matrix Switcher
The onscreen display indicates the version in “Cold Start”
or “Normal Start” during the power up procedure.
● WV-CU550 Series System Controller
SLW and FST modes are displayed in the menu for Ver.
6.00 or later.
Camera cc A1
Monitor mm SLW
FST
F3 F4F2F1
Matrix Switcher
ROM
CPU
Ver.
Control
Alarm
6.00
6.00
1.00
2.00
6.00
No.1
Output
RS-485
No.1
No.1
CPU
Unit
Position
01
Video
Character
VD/VS
Model WJ-SX550B
Type
Board SW.
No.
NTSC
1
VS
"Normal Start"