Filter
Top Products
Zoom/Focus adjustment
Press the ENTER button to display
the individual adjustment screen.
Press the I or H buttons to adjust
the projected image size.
Press the F or G buttons to adjust
the projected image focus.
The projected image focus or zoom
can also be adjusted by pressing
the FOCUS +/- or ZOOM +/- buttons
on the projector. To make fine
adjustments to the projected image
focus, use the FOCUS +/- buttons.
ENGLISH-49
Advanced Operation
48-ENGLISH
Lens adjustment
Select an item by pressing the F or G buttons on the remote control unit or
the projector.
LENS SELECT
Change the setting in accordance
with the type of projection lens (sold
separately) by pressing the I or H
buttons.
STANDARD
For standard projection
LONG FOCUS
For long-distance projection
(ET-LE30)
MIDDLE FOCUS
For medium-distance projection
(ET-LE20)
SHORT FOCUS
For short-distance projection
(ET-LE10)
Projection lens replacement
By replacing the projection lens with a lens that is sold separately, you can
change the projection distance.
#Turn the projection lens
anticlockwise until it is in
position.
$While pressing the lens
release button, turn the
projection lens anticlockwise
again.
%Remove the projection lens.
NOTE:
BWhen replacing a projection lens, make sure that the power is off (the
Power indicator illuminates green).
BDo not touch the signal connection. If any dust or lint gets onto the signal
connection, the electrical contact may become poor.
BDo not touch the surface of the lens with your bare hands.
BStore the replaced projection lens away carefully to avoid subjecting it to
excessive vibration or shock.
#Insert the other projection
lens (sold separately) as far
as it will go, while matching
the projection to the groove.
$Turn the projection lens
clockwise until a click is
heard.
Signal connection
Projection
Groove
LENS
ZOOM/FOCUS
LENS SELECT
STANDARD
SELECT:[^][@] ENTER:[ENTER]
ESC:[MENU]
Removing the lens
Installing the lens