Filter
Top Products
Appendix
Technical Information
ENGLISH - 52
Specifications
Power supply AC 100 - 240 V 50 Hz/60 Hz
Power consumption
300 W
During standby (when fan is stopped): 4 W
Amps 3.5 A - 1.2 A
LCD panel
Panel size (diagonal) 0.59 type
Aspect ratio 16 : 10
Display method 3 transparent LCD panels (RGB)
Drive method Active matrix method
Pixels 1 024 000 (1 280 x 800) x 3 panels
Lens
Manual zoom (1.2x)/Manual focus
F 1.65 - 1.93, f 18.53 mm - 22.18 mm
Optical axis 9 :1 fixed
Lamp UHM lamp (220 W)
Luminosity
*1
*1. Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
2500lm
Operating environment
Temperature
0°C - 40°C (32°F - 104°F)
When the ALTITUDE (page 38)
is set to HIGH: 0 °C - 35 °C
(32 °F - 95 °F)
Humidity 20% - 80% (no condensation)
Scanning
frequency
*2
(for RGB signal)
*2. See “List of compatible signals” on page 49 for available signals.
Horizontal scanning
frequency
15 kHz - 91 kHz
Vertical scanning
frequency
50 Hz - 85 Hz
Dot clock frequency Less than 110 MHz
COMPONENT (YPBPR) signals
525i (480i), 525p (480p), 625i (576i), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1 125 (1 080)/60i, 1 125 (1 080)/50i
Colour system 7 (NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/PAL60/SECAM)
Projection size 33" - 300" (838.2 mm - 7 620 mm)
Throw distance 1.1 m - 12.5 m (3'7" - 41')
Screen aspect ratio 16 : 10
Installation
FRONT/DESK, FRONT/CEILING, REAR/DESK, REAR/CEILING
(Menu selection method)
Speaker 1 piece 4 cm x 2 cm (1 - 9/16" x - 25/32")
Max. useable volume output 1.0 W (Monaural)