Panasonic PV-DF274 TV VCR Combo User Manual


 
38
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
1
Insert pre- recorded
tape.
Insert blank tape with
record tab.
• Dubbing tapes protected
with Copy Guard will
have poor quality results.
2
3
4
Press PLAY, then press PAUSE at
starting point to put in Standby mode.
Press PLAY to start dubbing.
Playing Source unit start playback.
Press STOP to stop dubbing.
Select “LINE” mode.
See page 22 “Selecting Input Mode”.
Press REC, then press STILL/PAUSE
immediately to put in Standby mode.
Press STILL/PAUSE to start dubbing.
Editing starts recording.
Press STOP to stop dubbing.
Refer to page 15 “Connecting the “1, 2” Input Terminal” before you operate it.
(Perform operation of steps 3 and 4 on both units at same time.)
Unauthorized exchanging and/or copying of copyrighted recordings may be copyright
infringement.
Copy Your Tapes (Dub bing)
Playback (Source) unit
Recording (Editing) unit
IMPORTANT
• Please note that some tapes cannot be dubbed on this unit. Also, it is not possible to dub DVD/CD to
VHS tape using this unit.
Note