Panasonic PV-DF275 TV VCR Combo User Manual


 
18
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
MTS Broadcast / TV Stereo System
The following are possible audio broadcast types and on-screen
displays. The signal being received is indicated with a “
” mark
while the selected audio mode is indicated with an arrow. To
change the audio mode for these broadcasts, see the “Audio Mode
for TV Viewing” section.
1 Press DISPLAY to display the broadcast signal
being received.
MTS Stereo broadcast:
Multi-channel Television Sound Stereo broadcast. Select
STEREO audio mode.
• If stereo broadcast is weak and the display flickers, select
MONO audio mode for possible improvement.
SAP broadcast:
Secondary Audio Program (sub language).
Select SAP audio mode for the sub language.
1 Press AUDIO to select the desired audio mode as
described above. (Arrow shows selection.)
• Each press of AUDIO will change the audio mode as shown below.
• “SAP” is selected with first press of AUDIO.
MONO broadcast:
Normal monaural sound broadcast.
< Example >
Equipped with -TV Noise Reduction for true MTS
reproduction.
-TV Noise Reduction is required for good
stereo separation and audio fidelity.
is a registered
trademark, and is licensed by
Technology Licensing.
MTS Stereo and SAP broadcast:
Multi-channel Television Sound Stereo (main language) and
Secondary Audio Program (sub language) broadcasts are being
received simultaneously. Select the STEREO or SAP audio
mode.
DISPLAY
AUDIO
Receivable Broadcast Types
Audio Mode for TV Viewing
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO