Filter
Top Products
25
Auto Operation Functions
Tape Position Display
Press TAPE POSITION to detect
current tape position.
1
DETECT
I
NG
TAPE
POS
I
T
I
ON
2
■■
■■
■Auto Shut Off
No broadcast signal in TV (Only when
Weak Signal Display is set to OFF),
blank tape is Played for 5 minutes
=> Power turns off
•This feature is canceled if any button is
pressed during above mode.
■■
■■
■Auto Playback
Insert a tape in Power off mode
=> Power turns on
•Playback begins if tape has no record tab.
■■
■■
■Auto Rewind (except for Recording)
Tape reaches its end
=> Rewind => Stop
■■
■■
■Playback Auto Eject
(Repeat Play is “OFF”)
Tape with no record tab reaches its end
Rewind => Stop => Eject
•“DETECTING TAPE POSITION”
is displayed only when a
cassette is first inserted and it
takes several seconds for
correct tape position to appear.
•The present tape position
indication and amount of tape
remaining (according to tape
speed) is displayed.
•Tape remaining time display may
not be precise.
Press TAPE POSITION (or wait 5
seconds) to return to normal screen.
•This function cannot display exact amount of
tape remaining for tapes 30 minutes or less, or
for tapes over 120 minutes in length.
Note
REW
FF
To find out present tape position and amount of tape
remaining.
Tape position is displayed for VHS-C Cassettes
type, tapes under 30 minutes, and some other
tapes, but the position is not correct.
SELECT/SET
:CH UP
:CH DOWN
:VOL UP
:VOL DOWN
SEARCH
FF
REW
TAPE
POSITION
NUMBER
Keys
BEG
I
N
END
SLP
R 120 MIN.
VIDEO INAUDIO IN
POWERVOLCH
STOP/EJECTREW/
PLAY/REPEAT
FF/RECTIMER/FM
ACTION
RECON TIMER
VIDEO INAUDIO IN
POWERVOLCH
STOP/EJECTREW/
PLAY/REPEAT
FF/RECTIMER/FM
ACTION
RECON TIMER
PROG TIMER
PROG TIMER
*Important: If a remote control button does not work when pressed, press the COMBO button
on the remote and try the button again.