Filter
Top Products
55
*Important: If a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
PROGRESSIVE OUT (DVD only)
SET
ACTION
SELECT
PROGRESSIVE OUT
1
Press
to select “PROGRESSIVE
OUT,” and
press
SET
repeatedly
for mode. (See below.)
2
OFF: Progressive scan signal is not output.
ON: Progressive scan signal is output from the
Component Video Output Connector.
Sets the Component Video Output Connector (p. 10, 13)
to output the Progressive scan signal.
3
Press
ACTION
to exit this mode.
Press
ACTION
to display DVD MAIN MENU.
DVD MAIN MENU
SELECT :
SET : SET
END : ACTION
DISC LANGUAGES
AUDIO OUTPUT
STI LL MODE :
AUTO
TV MODE : 4:3 Pan&Scan
PRO
GRESSIVE OUT
:OFF
DVD
Operation
Notes
• If the television is not progressive compatible,
a progressive scan picture is not available.
Connect the Video Output or S-Video Output
connector (see p. 12, 13) and set PROGRESSIVE
OUT to “OFF”.
• CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
TO SET PROGRESSIVE OUT TO “OFF”.
IF THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL 525p
DVD/VCR DECK, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
PV-D4734S P36-72 (040202).p65 2004/02/02, 13:1355