Filter
Top Products
1515
Initial Setup
Note to CABLE system installer:
This re mind er is pro vid ed to call the CABLE (Cable TV) System Installers at ten tion to Article 820-40
of the NEC that pro vides guide lines for proper grounding and, in par tic u lar, specifi es that the cable
ground shall be con nect ed to the ground ing system of the build ing, as close to the point of cable entry
as practical.
THU
SET
:
SET
SE
L
E
C
T
:
END
:
ACT
I
O
N
SET
C
L
OC
K
DST
:
O
N
SE
L
E
C
T
M
O
N
TH
*
Important:
If a remote control button does not work when pressed, press the TV/VCR button on
the remote and try the button again.
Manual Clock Set
If AUTO CLOCK SET was incomplete, manually
set the clock as follows.
Press ACTION on the remote to display
SET CLOCK Menu screen.
1
Press to select the month and press
SET to set. In the same manner, select
and set the date, year, time, and DST
(Daylight Saving Time).
2
Press ACTION twice to start CLOCK and
exit.
3
Reset all unit Memory Functions
When moving unit to a new location, or if a mistake
was made in the Initial Setup section.
• Make sure a tape is not inserted in the unit.
Turn the unit Power
on.
1
Press and hold both PLAY and FF on the unit
for more than 5 seconds.
• The power will shut off.
• Please ignore “NO CASSETTE” warning.
2
Perform “Initial Setup” on page 14.
3