Panasonic PVQ-1312W, PVQ-1312B, PVQ-2012, PVQ-2512 TV VCR Combo User Manual


 
Advanced Operation
23
VIDEO INAUDIO IN
POWER VOL CH
STOP/EJECTREW/
PLAY/REPEAT
FF/ RECTIMER/FM
ACTION
RECON TIMER
PROG TIMER
Auto Operation Functions
Tape Position Display
Press TAPE POSITION to detect
current tape position.
1
DETECT
I
NG
TAPE
POS
I
T
I
ON
2
Auto Shut Off
No broadcast signal in TV, blank tape is
Played for 5 minutes
=> Power turns off
This feature is canceled if any button is
pressed during above mode.
Auto Playback
Insert a tape in Power off mode
=> Power turns on
Playback begins if tape has no record tab.
Auto Rewind
Tape reaches its end
=> Rewind => Stop
Playback Auto Eject
(Repeat Play is “OFF”)
Tape with no record tab reaches its end
Rewind => Stop => Eject
“DETECTING TAPE POSITION”
is displayed only when a
cassette is first inserted and it
takes several seconds for
correct tape position to appear.
The present tape position
indication and amount of tape
remaining (according to tape
speed) is displayed.
Tape remaining time display may
not be precise.
Press TAPE POSITION (or wait 5
seconds) to return to normal screen.
This function cannot display exact amount of
tape remaining for tapes 30 minutes or less, or
for tapes over 120 minutes in length.
Note
REW
FF
<Model PVQ-2012 unit shown>
To find out present tape position and amount of tape
remaining.
Tape position cannot be detected for
C-Cassettes, tapes under 30 minutes, and some
other tapes.