Panasonic PV-V4612 VCR User Manual


 
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Video Cassette Recorder
Operating Instructions
(Advanced Operations)
For Basic operations, see the separate
“Basic Operations” instruction book.
Reset Language, Channels, Clock, VCR’s Output Channel
• Reset Language, Channels, Clock, VCR’s Output Channel • DST • On-Screen Displays (OSD)
Press ACTION
to display MENU.
Language
1)Press to select
language item.
For Spanish
For French
For English
Channels
2)Press to select
“ANTENNA,” then
press
to set
your antenna system
(“TV” or “CABLE.”)
After Channel Auto
Set is finished, Auto
Clock Set will be
performed.
3)Press
to select
“AUTO SET,” then
press
.
If you use Cable
Box, set it to the
PBS channel in your
time zone.
Clock
2) Press to select
“MANUAL,” and press
. (For Auto Clock Set,
select “AUTO CLOCK
SET.”)
(“TIME ZONE ADJUST”
appears only when
auto clock is set.)
3)Press and
to select and set
the date, time, and
DST (Daylight
Saving Time).
4)Press ACTION to
start the Clock and
exit this mode.
and press
to
subtract or add
hour(s) as necessary.
“TIME ZONE
ADJUST” returns to
“0” if clock is set
manually.
VCR’s Output Channel
After 3 seconds
To Make Corrections,
repeat steps 1) ~ 3).
2)Press
repeatedly.
3) Press ACTION to exit.
1)Press
to select
CHANNEL.
1)Press to select
CLOCK.
Time Zone
Adjust
1)Press to select
CLOCK.
(Only when Auto Clock
is set.)
2) Press
to select
“TIME ZONE
ADJUST”
3)Press ACTION.
Add or Delete a Channel
To add channel:
Select channel with NUMBER keys and
press ADD/DLT.
To delete channel:
Select channel with CH
/ or NUMBER
keys and press ADD/DLT.
DST (Daylight Saving Time)
VCR auto adjusts clock for DST.
Spring (First Sunday in April)
DST:ON Sets clock ahead one hour.
Autumn (Last Sunday in October)
DST:ON Turns clock back one hour.
If your area does not observe Daylight
Saving Time, select DST:OFF.
Keep these time changes in mind when
programming VCR for timer recordings.
1)Press to select
“VCR’S OUTPUT CH.”
3)Press ACTION.
2)Press
.
- 12 -
C
HANNEL
08
ADDED
C
HANNEL
08
DE
L
E
T
ED
On-Screen Displays (OSD)
REC
1
2
:
0
0
A
M
0
:
25
CH
02
-
0
:
1
2
:
3
4
SP
S
T
ER
EO
SAP
M
ONO
VCR Status & Clock Displays
Function & Channel Displays
Blank Tape/
No Video Signal Indications
When blank tape is detected during play,
or the current channel has no signal (with
Weak Signal Display feature (p. 10) set to
OFF), the TV screen will turn solid blue.
Function Status
Rec Time Remaining
(OTR mode only.
See p. 5 of Basic
Operations book.)
CH 0
8
Current Time
Channel
Tape Speed
(See p. 3 of Basic
Operations book.)
Broadcast Audio
Being Received
When a function button
is pressed, e.g. PLAY, or
you change channels,
a 5 second display
appears.
Counter
To display or remove
overlay at right,
press DISPLAY*.
On-Screen Displays (OSD)
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
- 11 -
Tape Position Display Feature
Special VCR Features
• Special VCR Features • Copy Your Tapes (Dubbing) • Before Requesting Service
•“DETECTING TAPE
POSITION only
appears the first time
a cassette is inserted
and it takes several
seconds for correct
indication to appear.
The present tape
position indication is
displayed.
BE
G
I
N
END
To find out the present tape position.
Tape position is displayed for VHS-C
Cassettes type, tapes under 30 minutes, and
some other tapes, but the position is not
correct.
When set to ON, picture is displayed
regardless of signal strength.
ON: Picture is displayed despite signal
condition an may have poor quality.
OFF: Screen turns solid blue when signal
is weak or non-existent.
Selecting ON has no effect on connected
equipment with blue back feature.
Press
to select
and display CHANNEL.
Press
to select
WEAK SIGNAL
DISPLAY, and press
to set ON or OFF.
The power shuts off at a preset time.
Press
to select
AUTO SHUT-OFF.
Press
repeatedly to
change shutoff time as
shown below.
1 Press TAPE POSITION
to detect tape position.
DETECTING TAPE POSITION
2
Press TAPE POSITION
to return to normal screen.
If Multi-brand feature is used (page 2), and this
feature is set to on, a warning appears
whenever an invalid key is pressed in TV, DSS,
or Cable mode.
If OFF, remote
warning will not appear
if invalid key is pressed.
Press
to select
REMOTE WARNING
and press
to set ON
or OFF.
Remote Warning ON/OFF Feature
1
Press ACTION to display menu.
2
3
Press ACTION to return to normal screen.
When set to ON, all operations except for timer
record and tape eject are prohibited. Useful for
households with small children.
V
CR
L
OC
K ACT
I
VA
TED
V
CR
L
OC
K
O
FF
VCR Lock cancels in 24 hours if clock is set.
To turn on, hold down
REC on the VCR in Stop
mode with no tape
inserted for 7 sec.
(Please ignore the NO
CASSETTE warning.)
To turn off, repeat above.
Auto Shut-Off Feature
1 Press ACTION to display menu.
2
3
Press ACTION to return to normal screen.
Weak Signal Display ON/OFF Feature
1
Press ACTION to display menu.
2
3
Press ACTION to return to normal screen.
VCR Lock Feature
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
- 10 -
OFF
2 Hours
4 Hours
6 Hours
The shut-off countdown will not
function during Play or Record.
Note
Insert pre-recorded tape. Insert blank tape with record tab.
Press REC, then PAUSE/SLOW
immediately to enter REC/PAUSE mode.
Press INPUT* to set VCR Input mode to LINE1
for Video Input (Rear) or to LINE2 for Video
Input (Front). (See Selecting the Input Mode
below.)
Press PLAY to start dubbing.
Playing VCR starts playback.
Press PAUSE/SLOW to start dubbing.
Recording VCR starts recording.
Press STOP to stop dubbing.
To Monitor Dubbing on Your TV
1 Turn your TV on and tune to the
Recording VCR channel (CH3 or CH4).
2 Set the VCR/ TV Selector on the
Recording VCR to VCR.
Dubbing tapes protected with Copy
Guard will have poor quality results.
Selecting the Input Mode
Method 1:
Press INPUT repeatedly.
Channel Number
LINE1
LINE2
Method 2:
Press CH
/ .
Display will change as below.
•“L1 or L2 lights on Multi-Function Display
(about 4 sec.) when LINE1 or LINE2 is
selected.
LINE1: For rear audio/video connection.
LINE2: For front audio/video connection.
Press STOP to stop dubbing.
Press PLAY, then PAUSE/SLOW
immediately to enter PLAY/PAUSE mode.
The operation of steps 4 and 5 must be done on both playing
and recording VCRs at the same time.
Playing (Source) VCR Recording (Editing) VCR
1
2
3
4
5
Caution: Unauthorized exchanging and/or copying of copyrighted recordings may be
copyright infringement.
- 9 -
Note
1
2
3
125
LINE1
(CABLE)
69
(TV)
or
LINE2
Copying Your Tapes (Dubbing)Before Requesting Service
Power
No power
Recording & Playback
TV program cannot be recorded...
Timer recording cannot be
performed
There is no playback picture, or the
playback picture is noisy or contains
streaks...
Special effects playback, picture may
contain some vertical jitter when using
a TV with an Automatic Vertical Hold
Control...
VCR cannot be controlled...
Check the following points once again if you are having trouble with your VCR.
(BO : refers to Basic Operations Instruction book.)
(AO : refers to Advanced Operations Instruction book.)
Correction
Completely insert Power Plug into an AC outlet.
Set POWER button to on.
Make sure power source is active.
Miscellaneous
Programs cannot be viewed on TV...
Video cassette cannot be inserted...
Video cassette cannot be removed...
Video cassette ejects when a
recording is started or the power is
turned off for timer recording...
In Stop mode, the motor (CYLINDER)
continues to rotate...
Remote Control
VCR cannot be remote controlled...
ACTION and PROG/VCR+ buttons do
not respond...
If you cannot resolve the problem, please call the Customer Call Center for product
assistance at 1-800-211-PANA (7262).
To locate an authorized servicenter, please call toll free 1-800-211-PANA (7262).
or send e-mail to : consumerproducts@panasonic.com
Correction
Check connections between VCR, external antenna, and
TV.
Check connections selection. (BO p. 4, AO p. 3)
Make sure your antenna system (CABLE or TV) is
correctly set. (Channels [AO p. 12])
Make sure cassette record tab is intact. (BO p. 3)
Confirm that clock is set to current time and date.
Make sure Cable/DSS box (if used) is left on and tuned to
channel to be recorded.
Set recording start/stop times correctly. (BO p. 6)
Make sure VCR POWER button is pressed off. (BO p. 6)
Timer recording may not be performed or continued if a
power interruption occurs before or during a Timer
Recording, even after power is restored.
Select channel 3 or 4 on TV to match VCR output channel
(3 or 4) (BO p. 4) or select LINE.
Set VCR/TV selector to VCR.
Adjust TRACKING control in either direction. (BO p. 3)
Try Head Cleaning. (BO p. 3)
Set TVs Vertical Hold Control to MANUAL, then adjust.
Make sure VCR power is on.
Check Remote batteries.
Make sure VCR LOCK is set to off. (AO p. 10)
Make sure Timer Record is not in progress.
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094
Panasonic Sales Company (“PSC”),
Division of Matsushita Electric of Puerto Rico, Inc.
Ave. 65 de Infantería. Km. 9.5 San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Printed in Indonesia
LSQT0579B
S1201-1052
P
Correction
Make sure VCR power is on.
Make sure Remote is in VCR mode.
Aim Remote Control directly at remote sensor on VCR.
(BO p. 7)
Avoid any object blocking signal path.
Check Remote batteries. (BO p. 3)
Make sure VCR LOCK is set to off. (AO p. 10)
Exposing VCR remote sensor to direct fluorescent or
outdoor light may cause signal interference.
Check connections between VCR, external antenna, and
TV.
Press VCR button for VCR mode. (AO p. 2)
Check Remote batteries. (BO p. 3)
Correction
Make sure TV power is on.
Make sure TV is set to output of VCR.
Check connections between VCR, external antenna, and
TV.
Set VCR/TV selector to TV. (BO p. 5)
Make sure proper signal source is selected.
Insert the cassette with window side up; record tab facing
you.
Check if a tape is already in the unit.
Completely insert Power Plug into an AC outlet.
Make sure cassette record tab is intact. (BO p. 3)
To enable Quick play mechanism, the cylinder will rotate
for about 3 minutes. This reduces response time from
Stop to Play mode and from Play to Rewind Search
mode.
- 8 -
Please read these instructions carefully before attempting to connect,
operate or adjust this product. Please save this manual.
LSQT0579B
As an ENERGY STAR
®
Partner, Matsushita Electric Corporation of
America has determined that this product or product model meets
the ENERGY STAR
®
guidelines for energy efficiency.
Model No. PV-V4612/PV-V4612S
Table of Contents
Multi-Brand Control Feature ..................................... 2
Advanced Connections (Cable/DSS) ....................... 3
MTS Broadcast / VHS Hi-Fi Stereo System ............. 4
Timer Recording Using VCR Plus+ System ............. 5
Tape Operation .................................................... 6, 7
Before Requesting Service ...................................... 8
Copying Your Tapes (Dubbing) ................................ 9
Special VCR Features ............................................ 10
On-Screen Displays (OSD) .................................... 11
Reset Language, Channels, Clock, VCRs Output Channel ... 12
VCR Plus+ and PlusCode are registered trademarks of Gemstar
Development Corporation. The VCR Plus+ system is manufactured
under license from Gemstar Development Corporation.
REPEAT PLAY :OFF
REMOTE WARNING :ON
AUTO SHUT
-
OFF :OFF
IDIOMA/LANGUE : ENGLISH
VCR’ S OUTPUT CH :3
VCR C
/
A CLOCK CH
SELE
C
T
:
EXIT
:
ACT
I
O
N
REPRISE LECTURE : NON
MESSAGE D ERREUR
:
OUI
COUPURE AUTO
: NON
LANGUAGE/IDIOMA : FRANÇAIS
CA SORTIE : 3
MAGNETO. C
/
A HORL. CA
SEL.
: REGLER:
QUITTER
:
ACT
I
O
N
REPETICION
:
INACT
AVISO/CONT.REMOTO
:ACT
APAGADO AUTOMATICO :
INACT
LANGUE/LANGUAGE:ESPAÑOL
CANAL DE SALIDA :3
VCR C
/
A RELOJ CA
ELEGIR
: FIJAR :
SAL
I
R
:
ACT
I
O
N
REPEAT PLAY :OFF
REMOTE WARNING :ON
AUTO SHUT
-
OFF :OFF
IDIOMA/LANGUE : ENGLISH
VCR S OUTPUT CH :3
SELE
C
T
:
SET
:
EXIT
:
ACT
I
O
N
VCR C
/
A CLOCK CH
REPEAT PLAY :OFF
REMOTE WARNING :ON
AUTO SHUT
-
OFF :OFF
IDIOMA/LANGUE : ENGLISH
VCR S OUTPUT CH :3
SELE
C
T
:
SET
:
EXIT
:
ACT
I
O
N
VCR C
/
A CLOCK CH
CH AUTO SET PROCEEDING
CANCEL : STOP
VCR C
/
A CLOCK CHANNEL
REPEAT PLAY :OFF
REMOTE WARNING :ON
AUTO SHUT
-
OFF :OFF
IDIOMA/LANGUE : ENGLISH
VCR S OUTPUT CH :3
SELE
C
T
:
SET
:
EXIT
:
ACT
I
O
N
VCR C
/
A CLOCK CH
REPEAT PLAY :OFF
REMOTE WARNING :ON
AUTO SHUT
-
OFF :OFF
IDIOMA/LANGUE : ENGLISH
VCR S OUTPUT CH :4
VCR C
/
A CLOCK CH
SELE
C
T
:
SET
:
EXIT
:
ACT
I
O
N
ANTENNA : CABLE
AUTO SET
WEAK
SIGNAL DISPLAY :
OFF
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
VCR C
/
A CLOCK CHANNEL
SELE
C
T
:
EXIT
:
ACT
I
O
N
ANTENNA : CABLE
AUTO SET
WEAK
SIGNAL DISPLAY :
OFF
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
VCR C
/
A CLOCK CHANNEL
SELE
C
T
:
SET
:
EXIT
:
ACT
I
O
N
AUTO CLOCK SET
MANUAL
TIME
ZONE ADJUST : 0
VCR C
/
A CLOCK CH
SELE
C
T
:
SET
:
EXIT
:
ACT
I
O
N
AUTO CLOCK SET
MANUAL
TIME
ZONE ADJUST : 0
VCR C
/
A CLOCK CH
SELE
C
T
:
EXIT
:
ACT
I
O
N
SELECT HOUR
9
/
29
/
20
0
2
SUN
2
:
--
P
M
D
S
T
:
ON
VCR C
/
A CLOCK CH
SELE
C
T
:
SET
:
EXIT
:
ACT
I
O
N
AUTO CLOCK SET
MANUAL
TIME
ZONE ADJUST : 0
VCR C
/
A CLOCK CH
SELE
C
T
:
SET
:
EXIT
:
ACT
I
O
N
IF YOU PRESS ACTION
KEY, VCR S OUTPUT CH
SWITCHES TO CH 4.
VCR C
/
A CLOCK CH
PLEASE TUNE YOUR TV TO
CH 4.
VCR C
/
A CLOCK CH
AUTO CLOCK SET
MANUAL
TIME
ZONE ADJUST : 0
VCR C
/
A CLOCK CH
SELE
C
T
:
EXIT
:
ACT
I
O
N
REPEAT PLAY :OFF
REMOTE WARNING :ON
AUTO SHUT
-
OFF :OFF
IDIOMA/LANGUE : ENGLISH
VCR S OUTPUT CH :3
VCR C
/
A CLOCK CH
SELE
C
T
:
SET
:
EXIT
:
ACT
I
O
N
REPEAT PLAY :OFF
REMOTE WARNING :ON
AUTO SHUT
-
OFF :OFF
IDIOMA/LANGUE : ENGLISH
VCR S OUTPUT CH :3
VCR C
/
A CLOCK CH
SELE
C
T
:
SET
:
EXIT
:
ACT
I
O
N
ANTENNA : CABLE
AUTO SET
WEAK
SIGNAL DISPLAY :
OFF
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
VCR C
/
A CLOCK CHANNEL
SELE
C
T
:
SET
:
EXIT
:
ACT
I
O
N
REPEAT PLAY :OFF
REMOTE WARNING :ON
AUTO SHUT
-
OFF :OFF
IDIOMA/LANGUE : ENGLISH
VCR S OUTPUT CH :3
VCR C
/
A CLOCK CH
SELE
C
T
:
EXIT
:
ACT
I
O
N
REC
1
2
Front of VCR
(Front Audio L/R Video IN jacks
are also provided)
Connect VIDEO OUT jack on Playing VCR to VIDEO IN jack on Recording VCR.
To monitor the dubbing, also connect a TV as shown.
Connect AUDIO L/R OUT jacks on Playing VCR to AUDIO L/R IN jacks on Recording VCR.
In place of a Playing VCR, you can use other equipment, such as a Camcorder.
Simply connect the units Audio/Video outputs to the Recording VCR.
VCR
(HiFi)
IN FROM ANT.
OUT TO TV
VIDEO OUT
AUDIO OUT
AUDIO IN
VIDEO IN
TV
VHF/UHF
R
L
R
L
R
L
R
VCR
(HiFi)
Connection
VIDEO IN 2
L-AUDIO IN2-R
(Rear connection shown.)
These displays will alert you to a missed
operation or provide further instructions.
OSD Caution
Page
PLEASE SET CLOCK BY
PRESSING ACTION KEY
If you attempt to set or review a Timer
Recording and the Clock is not set...
After a Timer Program has been set...
If you press REC on the remote
control or VCR, and a cassette is
inserted with no record tab...
If you press PLAY, FF, REW, or REC
on the remote control or VCR without
a cassette inserted...
CHECK CASSETTE
RECORD TAB
NO CASSETTE
TURN VCR OFF
FOR TIMER RECORDING
If you press POWER or STOP during
a Timer Recording...
(visible in VCR mode only)
If you press an invalid key on the
remote while in CABLE/DSS mode...
TO CANCEL TIMER REC
PRESS POWER THEN
STOP KEY
VIDEO HEADS MAY
NEED CLEANING
PLEASE INSERT HEAD
CLEANING CASSETTE
OR REFER TO MANUAL
END :PLAY
VCR LOCK ACTIVATED
REMOTE CONTROL IS SET
TO CABLE/DSS MODE
USE VCR : VCR KEY
If head cleaning becomes necessary
while playing back a tape...
If you press a function button other
than STOP/EJECT or POWER while
the VCR is in VCR Lock mode...
Warning and Instruction Displays
See page 6 of
Basic Operations
book
See page 6 of
Basic Operations
book
See page 3 of
Basic Operations
book
See page 5 of
Basic Operations
book
See page 6 of
Basic Operations
book
See page 3 of
Basic Operations
book
See page 10
See pages 2, 10
If you press an invalid key on the
remote while in TV mode...
REMOTE CONTROL IS SET
TO TV MODE
USE VCR : VCR KEY
See pages 2, 10
V4612S Advanced-1 (02-5-10) 2nd.p65 2002/05/10, 12:361
LSQT0579B(Advanced Operations) - Front