Filter
Top Products
10 EN
English
11EN
Using the universal remote control
3.2 Resetting a button to its
original function
If an improved button (
see chapter 2.2.2) still
does not function as expected, you can always
reset the button to its original function.
1
In the current
device mode, keep
digit buttons
and
pressed
simultaneously for 5
seconds,
until the
red Setup light
lights up.
• The remote control is now in setup
mode.
2
Press digit buttons
, and ,
in
that order.
• After each
button press
the red Setup
light
blinks once.
3
Press the button
that
you wish to
reset twice. E.g. the
22 button.
• After each
button press
the red Setup light
blinks once.
• The red Setup light
will blink one
more time to confirm that the button
was succesfully reset to its original
function.
4
+ VOL - ...................... adjusts TV volume.
................................ previous program / Last /
Back.
................................. mutes TV sound.
+ CH - ....................... next / previous channel.
5
5 .................................. rewind.
2 .................................... play.
6 .................................. fast forward.
9 .................................... stop.
0 ................................... record.
; ..................................... pause.
4P 3P ........................ previous (4P) / next
(3P) page / track in
various modes.
/ ....................... set your Thumb ratings.
6
............ digit buttons for direct
channel / track selection.
................................ used after direct channel
selection. Some devices
require
to be
pressed after channel
selection.
.......................... selects between one
and two-figure channel
numbers.
5 sec.
2 x