Filter
Top Products
Accessories / Options
8
Wall-hanging bracket
●
TY-WK4P1RW
(42” / 50” class)
●
TY-WK6P1RW
(65” class)
●
Tilting angle for this TV: 0 (vertical) to 20 degrees (42” class) / 10 degrees (50” / 65” class)
Rear of the TV
a
Depth of screw:
(42” / 50” class) minimum 10 mm,
maximum 16 mm
(65” class) minimum 17 mm,
maximum 23 mm
Diametre: M8
b
(View from the side)
Screw for fixing the TV onto the wall-hanging
bracket (not supplied with the TV)
Holes for wall-hanging bracket installation
a: 400 mm b: 300 mm (42” / 50” class)
a: 684 mm b: 300 mm (65” class)
Warning
●
Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself have the risk of personal injury and
product damage. In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a
licensed contractor to secure the wall-hanging brackets. Any damage caused by installing without a qualified installer
will void your warranty.
●
Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps to prevent
the TV from falling off.
●
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
●
Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall
before hanging bracket.
●
To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use.
Installing / removing remote’s batteries
1
Pull open
Hook
Caution
●
Incorrect installation may cause battery leakage and corrosion,
resulting in damage to the remote control.
●
Do not mix old and new batteries.
●
Do not mix different battery types (such as alkaline and manganese
batteries).
●
Do not use rechargeable (Ni-Cd) batteries.
●
Do not burn or break up batteries.
Batteries must not be exposed to excessive heat such as sunshine,
fire or the like.
●
Do not disassemble or modify the remote control.
2
Note the correct
polarity (+ or -)
Close