Filter
Top Products
20
Helpful Hint ( Normalization)
By pressing the Normal “N” Button on the Remote Control while the SOUND menu is displayed, the selected
menu will be changed to the Normal Mode.
Normalization will not occur if the menu is not displayed when the “N” Button is pressed.
The Normal mode is the factory preset condition. Returning to this original condition is called “Normalization”.
SOUND
Less
More
Less
More
Less
More
Left SP
Right SP
Less
More
Item Effect Function
Volume Adjusts output volume.
Bass Adjusts lower deeper sounds.
Treble Adjusts higher sharper sounds.
Balance
Adjusts the sound level difference
between left and right speakers.
Headphone
Adjusts Headphone volume.
volume
VOLUME, BASS, TREBLE, BALANCE, HEADPHONE VOL.
BASS
TREBLE
HEADPHONE VOL.
SURROUND
VOLUME
BALANCE
SOUND
OFF
MENU
MUSIC
SURROUND To enjoy a concert hall effect, turn SURROUND to on.
ON
OFF
Switching is also possible by pressing the button.
Press to switch between ON and OFF.
SURROUND ON SURROUND OFF
The benefits of SURROUND sound are enormous.
You can be completely enveloped in sound; just as if you were at a concert hall or cinema.
The SURROUND effect can be obtained without the use of external SURROUND speakers.
Stereo Bilingual Sound Selection
When you receive the stereo/bilingual sound system, sound output modes can be selected by
pressing the stereo/bilingual sound selection button.
Type of broadcast
Mode Indicator
Type of broadcast
Mode Indicator
Regular broadcast
(Standard Audio)
NICAM STEREO
STEREO
Mode Indicator
NICAM .......Used in New Zealand, Malaysia, Thailand, Indonesia etc.
I
No Indicator
Regular broadcast
(Standard Audio)
No Indicator
II
I
I
II
I
II
Regular + NICAM MONO I
(MAIN I )
NICAM DUAL MONO
(MAIN I / SUB II )
BILINGUAL or DUAL MONO:
MAIN I / SUB II
A2(German) .......Used in Australia, Malaysia,Singapore, China.
Audio Signal
STEREO MAIN I SUB II MONO
Notes:
• If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching
occurs, it is recommended you switch from STEREO to MONO.
• Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
• When the receiving conditions deteriorate, listening will be easier if the mode is set to the “MONO” position,
using the stereo/bilingual sound selection button.
• “DUAL”, also known as “DUAL MONO” or as “BILINGUAL” is not currently transmitted in some countries.
BASS
TREBLE
HEADPHONE VOL.
SURROUND
VOLUME
BALANCE
SOUND
OFF
MENU
MUSIC
03.10.29, 5:46 PMPage 20