Filter
Top Products
25
Press to select the code.
• The potential code is loaded for the device
selected in step 2.
• Press POWER button to test the operation.
• Repeat the steps until the component code is
found. It may take many attempts before the
correct code is found.
Press to store the code.
Operating peripheral equipment using the remote control
1
2
3
Enter the 3-digit infrared code
(see pages 26, 27).
• Factory default setting:
Panasonic
• Press POWER to test the
operation.
Press and hold POWER and
OK together, for at least 5
seconds.
• The mode selection buttons
flash, then release POWER
and OK.
POWER
+
123
456
78
0
9
CH
CH
VOL VOL
O K
VCR
DVD
DBS/
CBL
TV
Select the type of the component.
• The selected button lights and
all others go out.
Programming the remote control code
You can operate other manufacturers’ components using this TV’s remote control.
Preparations:
• Connect the plug of the external component to the wall outlet.
• Make sure the component is turned off.
Notes:
• If the component does not operate with the remote control, repeat
the procedure using another code. (Some brands have multiple
codes).
• If an incorrect code is entered, or if the procedure takes longer
than 30 seconds, the programming will fail.
To find a code not listed in the index
RETURN
EXIT
MENU
PLAY
R-TUNE
SLEEP
PROG
GUIDERECALL MUTETV/VIDEO
STOP
T V
PAUSE
REC
FFREW
ASPECT
TV/VCR
VCR/DBS CH
SAP
CH
O K
CH
VOL VOL
POWER
VCR
DVD
DBS/
CBL
TV
123
456
78
0
9
After step 2 above,