Filter
Top Products
27
Advanced
How to Use Menu Functions
(picture, sound quality, etc.)
How to Use Menu Functions
(picture, sound quality, etc.)
Menu list
Menu Item Adjustments/Configurations (alternatives)
Setup
Channel surf mode
Sets the mode to select the channel with the Channel up/down button.
(All/Favorite/Digital only/Analog only)
•
Favorite: Only channels registered as FAVORITE. (p. 18)
Language
Selects the screen menu language.
Clock
Adjusts the clock. (p. 16)
ANT/Cable setup
Sets channels. (p. 36)
Input labels
Selects the terminal and label of the external equipment. (p. 39)
Anti Image
retention
Pixel orbiter
Prevents “Image retention” with Wobbling. (Automatic/Periodic)
•
Automatic:
Shifts the display image automatically.
•
Periodic:
Shifts the display image every (1/2/3/4) minutes according to what was set in
the “Time (minutes)” menu.
Time (minutes)
Sets the time for the “Pixel orbiter-Periodic” setting. (1/2/3/4)
4:3 side bars
Changes the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only)
•
The recommended setting is “Bright” to prevent the panel “Image retention”. (p. 46)
Scrolling bar
Press “OK” to start the horizontal “Scrolling” on the screen. (p. 46)
VIERA Link settings
VIERA Link
Controls the equipment connected to HDMI terminals. (Off/On) (p. 30)
•
“Power off link”, “Power on link”, “Energy saving mode”, “Unselected device energy save”
and “Default speakers” cannot be selected if “Off” is set.
Power on link
Sets “Power on link” of the HDMI connected equipment. (No/Yes) (p. 30)
Power off link
Sets “Power off link” of the HDMI connected equipment. (No/Yes) (p. 30)
Energy saving
mode
Sets “Energy saving mode” of the HDMI connected equipment. (Quick start/Save) (p. 30)
Unselected device
energy save
Sets “Unselected device energy save” of the HDMI connected equipment. (p. 30)
(No (stay on)/Yes (with prompt)/Yes (no prompt))
Default speakers
Selects the default speakers. (TV/Theater) (p. 30)
ECO/energy saving
No signal for 10
minutes
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION
continue for more than 10 minutes. (Stay on/Power TV off)
Note
•
Not in use when “Auto power on”, “On/Off Timer” or “Lock” is set, or while “SD mode” or “Digital
Channel” is selected.
•
“No signal for 10 minutes was activated” will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by “No signal for 10 minutes”.
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
No activity for 3
hours
To conserve energy, the TV automatically turns off when no operation of remote and side
panel key continues for more than 3 hours. (Stay on/Power TV off)
Note
•
Not in use when “Auto power on” or “On/Off Timer” is set.
•
“No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by “No activity for 3 hours”.
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
Advanced
setup
Auto power on
Turns TV On automatically when the cable box or connected device is turned On (No/Yes)
TV AC cord must be plugged into this device. TV turns on every time the power is restored.
•
The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on” is set. (p. 40)
Image viewer
auto play
Sets the “Thumbnail” or “Slideshow” to play back SD cards automatically.
(Slideshow/Thumbnail/Set later/Off)
First time setup
Restarts the first time setup from “Language” setting. (p. 14)
About
Displays TV version and software license.
Reset to defaults
Performing Reset will clear all settings made with Setup, such as channel settings. (p. 36)
Sub menu list
Menu Item Adjustments/Configurations (alternatives)
Setup
SUB MENU
Channel surf mode
Sets the mode to select the channel with the Channel up/down button.
(All/Favorite/Digital only/Analog only)
Set favorite
Sets favorite channels. (p. 19)
Edit CH caption
Changes the station identifier. (p. 37)
Signal meter
Checks the signal strength if interference or freezing occurs on a digital image. (p. 37)
(Continued)