Panasonic TH-103PF9UK Flat Panel Television User Manual


  Open as PDF
of 48
 
9
– Cable fi xing bands
Secure any excess cables with bands as required.
Speakers (Optional accessories)
Pass the attached cable
fi xing band through the
clip as shown in the
fi gure.
To secure cables connected to Terminals, wrap the cable fi xing band around them then
pass the pointed end through the locking block, as shown in the fi gure.
While ensuring there is suffi cient slack in cables to minimize stress (especially
in the power cord), fi rmly bind all cables with the supplied fi xing band.
From SERIAL
Terminal on Computer
(see page 11)
From EXTERNAL
monitor terminal on
Computer (see page 10)
AC cord connection (see page 13)
To tighten:
To loosen:
Pull
Pull
Push the catch
Note:
At factory shipment, Terminal boards are installed in SLOT 2 and SLOT 3
Optional Terminal
Board Insert Slot
(covered)
DVI-D IN
Terminals
(see page 12)
COMPONENT/RGB IN
and Audio IN Terminals
(see page 12)
Close
Open
AUDIO OUT Terminals connection
Connections
1
2
SERIALPC IN
AUDIO
AUDIO OUT
RL
SLOT1 SLOT3
P
R
/C
R
/R P
B
/C
B
/B
Y/G
AUDIO
RL
COMPONENT/RGB IN
SLOT2
AUDIO
DVI-D IN
AUDIO OUT
RL
Note:
Make sure that the AC
cord is locked.
Push until
the hook clicks.
2. Pull off.
1. Keep the
knob pressed.
Stereophonic sound code
audio equipment
line-in
– Cable fi xing bands
Secure any excess cables with bands as required.
Pass the attached cable
fi xing band through the
clip as shown in the
fi gure.
To secure cables connected to Terminals, wrap the cable fi xing band around them then
pass the pointed end through the locking block, as shown in the fi gure.
While ensuring there is suffi cient slack in cables to minimize stress (especially
in the power cord), fi rmly bind all cables with the supplied fi xing band.
From SERIAL
Terminal on Computer
(see page 11)
From EXTERNAL
monitor terminal on
Computer (see page 10)
Optional Terminal
Board Insert Slot
(covered)
DVI-D IN
Terminals
(see page 12)
COMPONENT/RGB IN
and Audio IN Terminals
(see page 12)
AC cord connection (see page 13)
– AC cord fi xing
To tighten:
To loosen:
Pull
Pull
Push the catch
Unplug the AC cord
Unplug the AC cord pressing
the two knobs.
Close
Open
Plug the AC cord into
the display unit.
Plug the AC cord until
it clicks.
Fix the AC cord with
the clamper.
2
1
From input on
audio amplifi er
(see page 9)
 previous next