Filter
Top Products
27
HOTEL MODE Setup
Item Details
Initial Input
Off
RF AV1 AV2 AV3 YPbPr HDMI1 HDMI2 HDMI3 PC
Adjusts the input signal when the unit is turned on.
Off: The input signal when the power was last turned off is set.
Note:
This menu is available only when "Input Lock" is "Off".
RF mode is available only when Pal Tuner is connected.
Onscreen Display
Off: Onscreen information is not displayed.
On: Onscreen information is displayed, such as:
Power on display
Input signal switch display
No signal display
Mute and the remaining time of off-timer
On 1: Onscreen information is displayed, except some RS-232C communication information is not
displayed.
•
•
•
•
Initial VOL Level
Used to set the volume level at power-on.
Off: The volume is set to the same level as when the power was last turned off.
0 to 63: The volume is set to the selected level.
Note:
It is not possible to select an Initial VOL Level setting which is higher than the Maximum VOL Level setting.
Maximum VOL Level
Used to set the volume level so that it will not exced the maximum setting.
Off: No restrictions are placed on the volume level.
0 to 63: The volume is restricted to the selected level.
Note:
It is not possible to select a Maximum VOL Level setting which is lower than the Initial VOL Level setting.
Input Lock
Off
RF AV1 AV2 AV3 YPbPr HDMI1 HDMI2 HDMI3 PC
Locks the input switch operation.
Off: Input switch can be used.
Note:
RF mode is available only when Pal Tuner is connected.
Button Lock
Used to restrict the operation of the buttons on the main unit.
Off: All the buttons on main unit can be used.
Menu: Locks the Menu button on the main unit.
On:
Locks all the buttons on the main unit except the Power button.
Remocon User Level
Off
User1 User2 User3
Off: Y
ou can use all of the buttons on the remote control.
User1:
You can only use
POWER
,
INPUT
, ,
MUTE
,
VOL
buttons on the remote control.
User2: Y
ou can only use
POWER
button on the remote control.
User3:
Locks all the buttons on remote control.
Hotel Mode Menu List