Filter
Top Products
17
Standby (ON / OFF) button
The Plasma Display must fi rst be plugged into the wall
outlet and turned on at the power switch (see page 13).
Press ON to turn the Plasma Display On, from Standby
mode. Press OFF to turn the Plasma Display Off to
Standby mode.
SET UP button (see page 23)
SOUND button (see page 28)
DIRECT INPUT buttons
Press the INPUT “1”, “2”, “3” or “PC”
input mode selection button to select
the INPUT mode. (see page 15)
This button is used to switch directly
to INPUT mode.
Channel Adjustment
This button cannot be used for this model.
Volume Adjustment
Press the Volume Up “+” or Down
“–” button to increase or decrease
the sound volume level.
OFF TIMER button
The Plasma Display can be preset
to switch to stand-by after a fi xed
period. The setting changes to 30
minutes, 60 minutes, 90 minutes and
0 minutes (off timer cancelled) each
time the button is pressed.
30 60
0
90
When three minutes remain, “OFF
TIMER 3” will fl ash.
The off timer is cancelled if a power
interruption occurs.
Remote ID lock (see page 35)
Digital Zoom (see page 22)
MULTI Window buttons
(see page 20)
Status button
Press the “Status” button to display
the current system status.
1
Input label
2
Aspect mode (see page 18)
3
Off timer
The off timer indicator is displayed only
when the off timer has been set.
4
Clock display (see page 46)
R button (see page 23)
Press the R button to return to previous menu screen.
POSITION buttons
ACTION button
Press to make selections.
POS. /SIZE button
(see page 24)
PICTURE button
(see page 26)
INPUT button
Press to select INPUT1, INPUT2,
INPUT3 and PC input SLOTS
sequentially. (see page 15)
When a dual input terminal board
is attached, A or B is displayed
depending on the selected input
signal. (Ex. INPUT1A, INPUT1B)
Sound mute On / Off
Press this button to mute the sound.
Press again to reactivate sound.
Sound is also reactivated when power is
turned off or volume level is changed.
Numeric buttons
(see page 35)
ASPECT button
Press to adjust the aspect.
(see page 18)
SURROUND button
N button
(see page 25, 26, 27, 28)
Remote Control Transmitter
Basic Controls
OFF TIMER 90
1
2
3
4
PC
4:3
10:00
The surround setting switches on and off each
time the SURROUND button is pressed.
The benefi ts of surround sound are enormous.
You can be completely enveloped in sound; just
as if you were at a concert hall or cinema.
Note:
The surround settings are memorized
separately for each AUDIO MENU
(STANDARD, DYNAMIC, CLEAR).
ON
SURROUND
ON OFF