Filter
Top Products
2/2 Setup Menu
NSW / ACT
Region Select
On
SD Card LED
100Hz
Refresh Rate
Auto
Daylight Saving Time
System Information
Software Licence
3 seconds
VIERA Link Settings
Access
Banner Display Timeout
POWER
INPUT
MULTI PIP
SD CARD
ASPECT
F.P.
RECALL
CH
OPTION
EXIT
RETURN
MUTE
VOL
GRYB
VIERA Link On
Power off Link Set
VIERA Link Settings
Power on Link
Set
32
Select “Setup”
Select “VIERA Link Settings”
2
1
3
Display the menu
∗
Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function.
This TV supports “HDAVI Control 2” function.
Connections to some Panasonic equipment (DVD Recorder DIGA, HD Video Camera, Player theatre,
Amplifi er, etc.) with HDMI cables allow you to interface them automatically.
The equipment with “HDAVI Control” function enables the following operations:
•
Easy playback (p. 33)
•
Power on Link (p. 33)
•
Power off Link (p. 33)
•
Speaker control (p. 33)
In addition, the equipment with “HDAVI Control 2” function enables the following operation:
•
Easy control only with VIERA remote control (p. 33)
These features are limited to models incorporating Panasonic’s “HDAVI Control” and “VIERA Link”.
VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry
standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have
developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI
CEC cannot be guaranteed.
Refer to individual manuals for compatibility information. About applicable equipment, consult your local
Panasonic dealer.
4
VIERA Link “ Control
TM
”
∗
■
HDMI cable
This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. Recommended part number:
•
RP-CDHG15 (1.5 m)
•
RP-CDHG30 (3.0 m)
•
RP-CDHG50 (5.0 m)
■
Preparations
Setup the equipment to enable this function. Read the manuals of the equipment.
About connections, see “External Equipment” (p. 35). Read the manuals of the equipment too.
■
For the fi rst time / When adding new equipment, reconnecting equipment or changing setup
After connection turn the equipment on and then switch the TV on.
Select the input mode to HDMI1, HDMI2 or HDMI3 (p. 14), and make sure that an image is
displayed correctly.
Main Menu
VIERA Link
Picture
Sound
Setup
Select “VIERA Link”
and set to “On”
access
select
access
select
set
select