Panasonic TH-P55VT60Z TV Antenna User Manual


 
7
Connections
External equipment and cables shown are not supplied with this TV.
Ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Check the type of terminals and cable plugs are correct when connecting.
Always use a fully wired HDMI cable.
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.
Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.
Also read the manual of the equipment being connected.
Terminals
6 7
2
4
3
1
5
1
SD Card slot
2
USB 1 - 3 port
3
HDMI1 - 3 (p. 8, 9)
4
DIGITAL AUDIO OUT
5
AV (COMPONENT / VIDEO)
(p. 9)
6
Aerial terminal
(see below)
7
ETHERNET (p. 8)
Basic connections
Mains lead and aerial
Digital TV, Analogue TV
AC 220-240 V
50 / 60 Hz
Mains lead
(supplied)
Aerial
RF cable
Mains lead
Make sure that
the mains lead is
securely fixed
To remove from the TV:
tabs
Press both tabs and pull on
mains connector to release
Push until both side
tabs click
Keep RF (aerial) cable away from the mains lead to avoid and minimise mains interference pickup.
Do not place the RF cable under the TV.
An aerial, correct cable (75 Ω coaxial) and correct terminating plug are required to obtain optimum quality picture and
sound.
If a communal aerial system is used, you may require the correct connection cable and plug between the wall aerial
socket and the TV.
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial system for your
particular area and the accessories required.
Any matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs
incurred, are the responsibility of you, the customer.