Filter
Top Products
P-BOARD
The P-Board is secured to the bottom chassis by 4 screws on the base and 2 screws on the A.C. connector.
Ill SCREW
SCREW 2 SCREWS
SCREW
I IMPORTANT: I
Keep and re-use all hardware from
original set (screws, nuts, washers).
FAN
The FAN is assembled to a metallic base with two screws; this metallic base is assembled to the A-Board with one
screw to the bottom chassis and one screw to the back of the chassis
SCREW
FAN
SCREW
A13 SCREW
CONNECTOR
LIC BASE
TO A13
CONNECTOR
A13
CONNECTOR
-7-