Panasonic TX-55AX902B Flat Panel Television User Manual


 
16
English
Indicator / Control panel
When pressing 9, 10, 11 buttons, the control panel
guide appears on the right side of the screen for 3
seconds to highlight the pressed button.
12
21 3
10
9
11
567
48
Rear side of the TV
22 mm
1 Built-in Camera
Automatically comes out and back in by the
operation of a camera application.
Do not pull or push the camera by hands.
For the information of the camera operation, refer
to [eHELP] (Functions > Built-in Camera).
2 Lens part
3 Angle adjuster
Adjusts the angle of lens.
4 Human activity sensor
For the information of the sensor operation, refer to
[eHELP] (Functions > Info Bar).
5 Remote control signal receiver
Do not place any objects between the TV remote
control signal receiver and remote control.
6 Ambient sensor
Senses brightness to adjust picture quality when
[Ambient Sensor] in the Picture Menu is set to
[On].
7 Power LED
Red: Standby
Green: On
Orange: Standby with some functions (recording,
etc.) active
The LED blinks when the TV receives a command
from the remote control.
8 LED illumination
Lights LED according to settings.
To turn the LED illumination off
Set [LED Illumination] in [Other Settings]
(Setup menu) to [Off]
Set [LED Illumination] in [Info Bar Settings]
(Setup menu) to [Off]
Slide your finger to move the cursor
(on internet contents or [Cursor
Settings] in [VIERA Touch Pad
Controller] (Setup Menu)), select
the item, adjust levels, etc.
Trace the fringe to scroll.
Installing / Removing batteries
Slide open
Note the correct
polarity (+ or -)
Close
Note
It is recommended to hold Touch Pad Controller with
your hand when using.
The battery power will be used whenever you use
Touch Pad Controller (including the touch of the touch
pad) even if not operating the TV. It may decrease the
battery life.
Some operations differ depending on the application.