Filter
Top Products
28
In areas of poor reception or constant interference a slight adjustment to the tuning may improve the picture
quality.
Using the Remote Control
1. Select the Programme location number you
want to fine tune.
2. Push the Set Up ( ) button.
3. Push the or button to select the
Tuning Menu.
4. Push the or button to access the Tuning
Menu.
5. Push the or button to select the
Fine Tune.
6. Push the or button to start the fine tune.
7. The television will fine tune in the direction
chosen by you.
8. To store the selected station, push the .
9. Push the Set Up ( ) button twice to return the
television to the Set Up menu.
10. Push the button to return the television to
normal operation.
Using the Front Panel
1. Select the Programme location number you
want to fine tune.
2. Push the F button repeatedly until the Tuning
Mode is reached.
3. Push the -/\/ or +//\ Button to access the
Tuning Menu.
4. Push the F button to access Fine Tune.
5. Push the -/\/ or +//\ Button to fine tune the
station.
6. The television will fine tune in the direction
chosen by you.
7. Push the STR to store the selected station.
8. Push the F button to return the television to the
Tuning Menu.
9. To return the television to normal operation
push the button on the remote control or
repeatedly push the F button until the volume
display appears.
10. The on screen display will disappear after a
few seconds.
11. Push the TV/AV button on the front panel to
return the television to normal operation.
Tuning Menu
Fine Tuning
Canceling the Fine Tuning
To cancel the Fine Tuning follow the Manual tuning procedure on page 27.
Note: Pushing the button at any time will stop the Fine tuning and return you to normal viewing.
A
uto tuning
Manual tuning
Skip Off
Tuning menu
Fine tuning
Sys select Australia