Filter
Top Products
How to Use Menu Functions
30
Menu
Item Adjustments / Configurations (alternatives)
Sound
PCM Optical Level
Adjusts the audio level of PCM output from DIGITAL AUDIO OUT terminal as the initial
setting [-12] / [-10] / [-8] / [-6] / [-4] / [-2] / [0] (dB)
t
Normally, PCM sound is larger comparing with the other types of audio track.
t
DVB mode only
HDMI1 / 2 Input
Select to fit the input signal [Digital] / [Analogue] (p.70)
[Digital] : HDMI cable connection
[Analogue] : HDMI-DVI adaptor cable connection
t
HDMI input mode only
SPDIF Delay
Adjusts the delay time of the sound output from DIGITAL AUDIO OUT terminal if the
sound does not synchronize the image
t
DVB mode only
Reset to Defaults
Press the OK button to reset the present Sound Mode, [Balance], [Headphone Volume]
and [Surround] to the default settings
Setup
Timer Programming
Sets a timer to remind watching or record forthcoming programmes (p.41)
t
DVB mode only
Off Timer
Sets the time until the TV automatically goes to Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p.16)
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode
t
If you press the OK button, the following items are set as below :
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save], [Power Save] [On]
[Intelligent Auto Standby] [On (No reminder)]
[Auto Standby] [2 hours]
Link Settings
VIERA Link Sets to use VIERA Link functions [Off] / [On] (p.60)
AV1 out
Chooses the signal to be transmitted from the TV to Q-Link
[TV] / [AV2] / [Monitor]
[Monitor] : Image displayed on screen
t
Component and HDMI signals cannot be output.
Power on Link Sets to use Power on Link function [Off] / [On] (p.59,60)
Power off Link Sets to use Power off Link function [Off] / [On] (p.59,60)
Standby Power Save
Controls the power consumption in Standby mode of the connected equipment to
reduce the consumption [Off] / [On] (p.61)
t
This function is available when [VIERA Link] is set to [On] and [Power off Link] is set
to [On].
Intelligent Auto
Standby
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
[Off] / [On (With reminder)] / [On (No reminder)] (p.61)
t
This function is available when [VIERA Link] is set to [On].
Download
Downloads channel, language, country / region settings to a Q-Link or VIERALink
compatible equipment connected to the TV
t
DVB-C channel settings cannot be downloaded.
Child Lock Locks a channel / AV input to prevent access to it (p.43)