Filter
Top Products
16
First, PC is started, and then Windows is started.
The CD-ROM with USB driver software is inserted into the
CD-ROM drive.
Next, touch panel and PC are connected with a USB cable.
(see page 10)
When a USB cable is connected, it is recognized as a new
hardware, and a message is indicated.
Setup Wizard will start.
1
Click on this button.
“Install Hardware Device Drivers” is indicated.
2
Choose this item.
3
Click on this button.
“Locate Driver Files” is indicated.
4
Choose “CD-ROM drives”.
5
Click on this button.
Installation of the USB Driver
Install USB Driver
In case of Windows 2000