Filter
Top Products
Frequency Response:
Signal to Noise Ratio:
Channel Separation:
Total Harmonic Distortion:
Amplitude Linearity:
Phase Linearity:
Maximum Jitter (HF):
D-A Converters:
Oversampling Rate:
Digital Input:
Filters:
Absolute Polarity:
Digital Inputs:
Outputs:
Power Supplies:
Power Requirement:
Dimensions:
Net Weight:
Specifications subject to change without notice. "ST" is a registered trademark of AT&T Corporation.
D/AC-1000 Specifications
+O.25dB
2.5Hz-20kHz, -O.50dB
> 110dB, 115 dB typical
> 100dB @ 20kHz
< 0.0025% @ 1 kHz
>95dB; 98dB typical
fO.lo @ 20kHz
<150 picoseconds RMS
20 bit, push-pull, independent for each channel
8x (352.8kHz)
32kHz - 48kHz, Consumer standard SPDIF
8x interpolating digital filter
two 2I3-order low-pass anti-imaging filters
00 or 1800 switchable
. Coaxial: 750, RCA
. TOSlink fiber optic: EIAJ Standard CP-340/RC-5720,
660nm typical wavelength
. ST module fiber optic: AT&T Standard, 820nm typical
wavelength . ~
. Analog Line Out: 2V nominal, 600.0, suitable load C!: 10k.o
. Digital: 75.0 RCA coaxial, 0.5V peak-to-peak
3 separate transformers for digital; each analog channel
120V,60Hz, 15W; may be re-wired for 220-240V, 50Hz
19" W x 33/8" H x 12" D
15.41b.