Filter
Top Products
8 of 29 ISSUED: 05-09-05 SHEET #: 095-9224-9 12-05-09
Cords may also be routed using plastic covers (H).
Route cords inside arm slots of wall arm (A). Lock cords into place by snapping cord corvers onto mount as
shown in figure 4.3. NOTE: Be sure arrow on inside of plastic covers (H) point toward screen as shown in detail 2.
NOTE: Make sure cords have enough slack to allow full movement of the arm.
Cables may also be secured to slot at bottom of wall plate using a cable tie (L) as shown below.
4-2
4-3
fig. 4.3
DETAIL 2
H
L
CORD
CORD
SLOT