6 of 6
ISSUED: 12-04-07 SHEET #: 095-9280-3 03-25-10
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-865-2112 or 708-865-8870.
For optional installation of electrical gang box, access plates located on the bottom or top of in-wall box can be
Insert up to four cable management clips (F
for routing cables. Refer to instruction included with PA740 articulating arm (AA) for cable management with arm.
Insert cable bushing (E) into top or bottom hole of in-wall box for routing cables through in-wall box. Plastic
G) can be used in holes where cables are not being routed.
NOTE: Make sure cables have enough slack to allow full movement of the arm.
Use cable ties (H
Cable Management
4
F
E or G
H
CABLES
g. 4.2
g. 4.3
g. 4.1
ACCESS
PLATE
4-1
© 2007, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.