4 of 6
ISSUED: 12-04-07 SHEET #: 095-9280-3 03-25-10
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-865-2112 or 708-865-8870.
Installation to Wood Stud Wall
attached hardware and components.
screws, greatly reducing their holding power.
is highly recommended.
-
ers are responsible to provide hardware for other types of mounting situations.
WARNING
LEFT
ORIENTATION
RIGHT
ORIENTATION
g. 1.2 g. 1.3
C
A
g. 1.4
D
B
A
A
In-wall box (A
of the stud. Based on its edges, draw two vertical lines down
the inside edges of stud’s. Mark desired center of in-wall box.
box (A
this line to outline wall opening between inside edges of studs.
Remove drywall inside cut outline.
NOTE: In-wall box (A) can be installed for left or right side
Insert in-wall box (A
drywall.
Level in-wall box (A), and mark the position of two mounting
holes using holes on mounting tabs. Remove in-wall box (A)
the locations previously marked. Reinstall and level in-wall
box (AB) as
Attach two mounting cover plates (C) to in-wall box (A) using
four ribbed rivets (D
1
g. 1.1
(311mm)
(368mm)
STUD
(150mm)
CUT
TABS