Filter
Top Products
4 of 4
ISSUED: 03-30-07 SHEET #: 124-9053-1
Note: Model ST 630 is required for assembly.
Tilt assembly of ST 630 is required to complete step 2.
Attach tilt assembly to column plate (A) using two 1/4-20 x 1/2 phillips screws (D), two split washers (F) and two flat
washers (E).
2
E
F
D
A
TILT
ASSEMBLY
Refer to Attaching Adapter Plate to Flat Panel Screen section of ST 630 instruction manual to complete assembly.
© 2007, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Installation of ST 630 to Column Plate