Filter
Top Products
7 of 9
ISSUED: 08-02-05 SHEET #: 202-9010-1
To prevent scratching the screen, set a cloth on a flat, level surface that will support the weight of the screen. Place
screen face side down. Attach the interface bracket (BB) to the PLP adapter plate (sold separately) using four M10 x
15 mm socket head screws (EE) as shown in figures 2.1 (portrait) or 2.2 (landscape).
2
Installing Interface Bracket to PLP Adapter Plate
• Tighten screws so adapter brackets are firmly attached. Do not tighten with excessive force. Overtightening can cause
stress damage to screws, greatly reducing their holding power and possibly causing screw heads to become
detached. Tighten to 40 in. • lb (4.5 N.M.) maximum torque.
WARNING
fig. 2.1
(portrait)
EE
BB
GENERIC PLP
ADAPTER PLATE
fig. 2.2
(landscape)
EE
GENERIC PLP
ADAPTER PLATE
BB