Filter
Top Products
Pelco Manual C682M-E (11/01) 43
8. Select the CD-RW drive and click Next. The following appears:
9. Type the title of the CD-RW in the place provided, and then select Finish. The follow-
ing dialog box appears.
10. Select OK; fast format is initiated. Approximately three minutes will pass and the
following dialog box appears:
The dialog box indicates that fast format has been initiated. Although it will still take
about three hours to completely format the disc, fast format operates in the back-
ground allowing you access to the formatted portion of the disc.
11. Exit Explorer. Select Cancel when the dialog box appears to return to the DX7000
DISPLAY mode.
NOTE:
You can safely interrupt fast formatting by ejecting the disc. The disc is still
readable in other CD-RW drives, but you cannot write data to it until formatting is
complete. When you re-insert the disc in a drive using HP fast format, the formatting
continues from where it left off.
01209
01210
01206