Filter
Top Products
12 C1607M (6/04)
Remove the Drive Mount Baskets
1. Remove hard drive mounting basket:
a. Using a Phillips-head screwdriver, unfasten and save the four screws that attach the drive basket to the
chassis. Refer to Figure 10.
b. Gently lift the basket up and out with drive attached. Be careful not to force the basket free or to disturb other
components inside the unit.
Figure 10. Removing Hard Drive Basket
IMPORTANT: When upgrading your unit, it is recommended that you do not remove previously
installed drives from the drive basket. However, if you do remove a drive for any reason, be sure to
note the arrangement of the drives within the drive basket and reinstall them in the same order they
were before removal. It is critical that drives be returned to the DX8000 in their original order.