Filter
Top Products
C2230M (2/07) 7
2. Use the included six bolts, washers, and nuts to assemble the tilting mechanism. (Refer to Figure 2.)
a. Install a bolt, washer, and nut where each tilt arm attaches to the bottom of the wall mount bracket.
b. Install a bolt, washer, and nut on each tilt adjustment mechanism where it attaches near the middle of the wall mount bracket.
c. Finally, install a bolt, washer, and nut where the tilt adjustment mechanism attaches to the tilt arm. Attach so the tilt arm is
completely upright (0 degrees in Figure 2) for attaching the monitor.
Figure 2. Tilt Angle
NUT
0°
BOLT
5° 10°
15° 20°