Filter
Top Products
To attach the PMCL-V100 to a monitor mount:
1. Use the 10-32 x 3/4-inch pan head Phillips screws, #10 split lock washers, and hex nuts (supplied) to secure the adapter plate to the monitor mount.
Refer to Figure 1.
Figure 1.
Attaching the PMCL-V100 Monitor Mount Adapter to a Monitor Mount
2. Attach the monitor mount to the monitor. Align the monitor to the correct hole pattern on the mounting plate. Use the M4 x 0.70 x 6 mm screws
(supplied) to secure the monitor to the mounting plate. Refer to Figure 2.
Figure 2.
Attaching the PMCL-V100 Adapter and Monitor Mount to a Monitor
3. Refer to the installation manual shipped with the Pelco monitor mount for further instructions.
10-32X3/4 PHILLIPS SCREW
#10 SPLIT LOCK WASHER
PMCL-WM1A MONITOR MOUNT
HEX NUTADAPTER PLATE
M4X10MM PHILLIPS SCREW
PMCL-V100 ADAPTER PLATEPMCL-WM1A MONITOR MOUNT