Filter
Top Products
C2619M (8/06) 11
After the system has completed resetting system configuration and deleting all recorded video, the following message appears.
Figure 14. Completion Message: Resetting System Configuration and Deleting Video
After the procedure has completed, the recovery disc is ejected and the DVR5100 restarts automatically.
4. If the procedure was unsuccessful, repeat the procedure.
The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.
REVISION HISTORY
Manual # Date Comments
C2619M 8/06 Original version.
Pelco and the Pelco logo are registered trademarks of Pelco. ©Copyright 2006, Pelco. All rights reserved.
Endura is a trademark of Pelco.