Filter
Top Products
C695M-QS (12/03) 7
DX3100RX REMOTE SITE SOFTWARE
NOTE: Before installing this software, refer to the DX3100 Series Remote Site Software manual for minimum system requirements.
NOTE: This Quick Start Guide is written for installers who are familiar with the Windows
®
operating system.
Installation
ᕡ
Insert the Remote Site Software CD that came with the DX3100.
ᕢ Follow the on-screen prompts, specifying default program folder.
ᕣ Restart the computer.
Configuration
ᕡ
Launch the Remote Site Software:
Start > Program > DX3100RX > DX3100RX v1.0.
ᕢ Click OK on the Input password screen. You can add a password later.
ᕣ Create a site for the DX3100:
a. Click CONNECT. The Site/File Open screen appears.
b. Click Add. The Connection Property (New) screen appears.
c. Do the following:
• Site Name: Enter the site name for this DX3100. It appears on the screen when you access the site.
• Server IP: Enter the network address for the DX3100. It must match the IP ADDRESS field on the NETWORK SETUP screen on
the DX3100.
• User ID: Enter dx3100 (case-sensitive).
• Password: Enter the password from the PASSWORD field on the NETWORK SETUP screen on the DX3100.
• Camera: Specify the cameras to display.
d. Click OK.
ᕤ Select Live or Remote Playback on the Site/File Open screen. Then click OK. The site video (live or playback) begins to display.
Operation
ᕡ
Launch the Remote Site Software:
Start > Program > DX3100RX > DX3100RX v1.0.
ᕢ Click OK on the Input password screen. You can add a password later.
ᕣ Click CONNECT. The Site/File Open screen appears.
ᕤ Select the DX3100 to view.
ᕥ Select Live or Remote Playback on the Site/File Open screen. Then click OK. The site video (live or playback) begins to display.
NOTE: To reconnect automatically when a network error occurs, select Try Reconnecting Continuously for Network or Server Error on the
Network Setup screen.
Pelco, the Pelco logo, Spectra, and Esprit are registered trademarks of Pelco in the United States and other countries.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
© Copyright 2003, Pelco. All rights reserved.